Masking Compound

INTRODUCTION
It is an anti-carburising compound used while masking of selected areas component where carbon penetration is not desired. It works very effectively for the surfaces of the components where masking compound is applied during process of carburising

METHOD OF APPLICATION
Masking compound which can be easily applied on the chosen areas by brushing, dipping or by spraying. Normally a uniform layer obtainable by single coat application. Two coats of this compound is recommended where case depth for carburising is more.

TYPES OF MASKING COMPOUND
A) Non Aqueous Masking Compound.
This is a quick drying masking compound which is very stable and also effective in preventing carbon penetration on selected surfaces.

B) Water Based Masking Compound
This is a stable and eco-friendly masking compound easily applicable for prevention of carbon penetration as required.

ADVANTAGES
1) Simple in application by brushing, dipping or spraying.
2) Quick drying in a well ventilated area.
3) Stable and eco-friendly in use.
4) No risk of cracking on uniform coating during process of heat treatment
5) Very much cost effective.